An open source hardware kit for the Makers in India.
The BreadBoard Power Supply Kit v2.0 is a Learn to Solder Do-It-Yourself Kit. After it is fully assembled, it can easily connect to the power rails of a standard 830 tie-point Bread Board. BBPS v2.0 takes its input from a standard wall adapter supplying 6 - 12V into the Vin Port of the PCB through DC Jack or Screw Terminal and provides a regulated 3.3V or 5V output as required by the user. The PCB is fully labeled and includes names and values of all the components needed. Get yourself an open source hardware in the form of BreadBoard Power Supply Kit v2.0.
Please note that the BreadBoard Power Supply v2.0 is compatible with 830 tie-points BreadBoards only.
BreadBoard Power Supply Kit v2.0 contains the following Items:
- Bare PCB with Silkscreen Indicators
- LM317 Voltage Regulator (TO-220)
- Resettable Fuse - 500mA PTC
- 1N4007 Reverse Protection Diode
- 100µF / 25V Capacitor
- 10µF / 50V Capacitor
- 0.1µF Ceramic Capacitor
- Power LED
- 2x SPDT Slide Switch
- 2x (2x2) Male Header Pins
- 2x 330Ω Resistor 1/4W
- 390Ω Resistor 1/4W
- 240Ω Resistor 1/4W
- DC Barrel Connector (2.1mm center positive)
GitHub Repository for EAGLE Files - Explore Labs' GitHub
- Additional Information
Processor No Architecture No Clock Speed No Digital Pins No Analog Pins No PWM Pins No Hardware UART No Programming Interface No Flash Memory No Operating Voltage No Power Output No Antenna No Range (Indoor/Urban) No Range (Outdoor/RF Line of Sight) No Channel Capacity No Frequency No Transmit Current @ 3.3V No