An open source hardware kit for the Makers in India.
The BreadBoard Power Supply fits right into your BreadBoard and powers its rails with either 5V or 3.3V.
After it is fully assembled, it can easily connect to the power rails of a standard 840 tie-point Bread Board. It takes its input from a standard wall adapter supplying 6 – 12V into the DC Jack of the PCB. And provides a regulated 3.3V or 5V output from a power selection jumper. The PCB is fully labeled and includes names and values of all the components needed and has a very High Quality RoHS Compliant Lead-Free finish. Get yourself an open source hardware in the form of BreadBoard Power Supply Kit.
The following components are present in the kit:
| Bare PCB with Silkscreen Indicators |
| DC Barrel Connector (2.1mm center positive) |
| LM317 Voltage Regulator (TO-220) |
| Resettable Fuse – 500mA PTC |
| 1N4007 Reverse Protection Diode |
| 100uF 25V Capacitor |
| 10uF 16V Capacitor |
| 0.1uF Ceramic Capacitor |
| Power LED |
| SPDT Slide Switch |
| 7 x 0.1″ Header Pins (2+2+3) |
| 2 x 330 Resistor 1/4W |
| 390 Resistor 1/4W |
| 240 Resistor 1/4W |
| Open Source Hardware Logo (Cool!) |
Some features of the Printed Circuit Board
| Double-Sided PCB |
| FR-4 Fiberglass Reinforced Epoxy sheets |
| RoHS Compliant – Only PCB |
| Solder Mask – Green |
| Surface Finish – Immersion Gold |
| White Silkscreen Layer (Everything Labeled Clearly) |
Leave a Comment