The Hakko FS-100 is a lead free solder tip cleaning paste. It is best suited for the removal of oxidation on soldering iron tips. It can also be used for retinning of soldering tips
- Re-tins oxidized soldering iron tips and increases tip life
- Doesn't contain lead or diammonium phosphate
- As Diammonium Phosphate [(NH4)2HPO4] is not included, P.W.B. (or, PCB) is not corroded due to flux residue (Conforming to the JIS Z 3197 test method).
Note: For optimum performance, use the FS-100 paste in conjuntion with the Hakko FT-700 tip polisher for increased oxide removal. To securely attach the chemical paste to the FT-700, attach the accessory two side tape (included with FS-100) to the bottom of the paste and secure it on top of the Hakko FT-700.
How to use:
To remove oxides from tip, dip the tip into the chemical paste for 2-3 seconds (use a temperature setting of around 300ºC). Next, remove the chemical paste using a cleaning sponge or cleaning wire like this or this or using the Hakko FT-700.
Model No. FS-100 Amount 10g Ingredients Flux Paste, Tin (Sn) - 50 wt% (each)