Intel Edison Arduino Breakout Expansion Board without Intel Edison SoC

This kit includes a Arduino Breakout, which essentially gives your Edison the ability to interface with Arduino shields or any board with the Arduino footprint. Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1) are all in the same locations as on the Arduino Uno R3 (Arduino 1.0 pinout). Additionally, the Intel® Edison Arduino Breakout includes a micro SD card connector, a micro USB device port connected to UART2, and a combination micro USB device connector and dedicated standard size USB 2.0 host Type-A connector (selectable via a mechanical microswitch). Though this kit won’t turn your Edison into an Arduino itself, you will, however, gain access to to the Arduino’s shield library and resources!

Notes:

• Intel Edison SoC is not included. This is Breakout Expansion Board only.

Includes:

• Arduino Breakout Board

Features:

• Arduino Breakout
  • Compatible with Arduino Uno (except only 4 PWM instead of 6 PWM).
  • 20 digital input/output pins including 4 pins as PWM outputs
  • 6 analog inputs
  • 1 UART (RX/TX)
  • 1 I²C
  • 1 ICSP 6-pin header (SPI)
  • Micro USB device connector OR (via mechanical switch) dedicated standard size USB host Type-A connector
  • Micro USB device (connected to UART)
  • SD Card connector
  • DC power jack (7V – 15V DC input @ 500mA)

Documents:

• Intel® Edison Tutorials
• Intel® Edison Product Brief
• Getting Started
• Hardware Guide
• Software Downloads
• Intel® Edison Product Page

Features:

• Arduino Breakout
  • Compatible with Arduino Uno (except only 4 PWM instead of 6 PWM).
  • 20 digital input/output pins including 4 pins as PWM outputs
  • 6 analog inputs
  • 1 UART (RX/TX)
  • 1 I²C
  • 1 ICSP 6-pin header (SPI)
  • Micro USB device connector OR (via mechanical switch) dedicated standard size USB host Type-A connector
  • Micro USB device (connected to UART)
  • SD Card connector
  • DC power jack (7V – 15V DC input @ 500mA)

Documents:

• Intel® Edison Tutorials
• Intel® Edison Product Brief
• Getting Started
• Hardware Guide
• Software Downloads
• Intel® Edison Product Page